The modern skipper has to hand information about almost everything around them.
In addition to engine and boat instruments, Vetus electronics can display information about the wind, the depth, the boat's heading, or checking the bilges for dangerous gases.
Boat Electronics
Vetus boat electronics are designed to integrate perfectly with other instruments and panels and are designed to the highest standards.
| EC |
Electronic compass with rotating card display and a fixed lubber lone reference. Heading is also indicated digitally at the bottom of the screen. Works on 12v or 24v, NMEA0183 compatible, IP65 waterproof. Solid state sensor included. |
110 x 110mm |
| ECGPS |
Electronic compass with GPS read-out. Heading is also indicated digitally together with position. Push button menu allows log, trip counter and boat speed to be shown. Works on 12v or 24v, NMEA0183 compatible, IP65 waterproof. Solid state sensor included. |
110 x 110mm |
| ECS1 |
Solid state sensor for electronic compass for 12/24v. IP66 waterproof. NMEA0183 output allows connection to all major brands of electronics. |
110 x 73 x 57mm |
| ECS3 |
Solid state sensor for electronic compass for 12/24v with GPS receiver. IP66 waterproof. NMEA0183 output allows connection to all major brands of electronics. |
110 x 73 x 57mm |
| COMBI4 |
Combined speed, log, depth sounder and water temperature. Includes NMEA0183 through-hull transducer which measures speed, depth and water temperature in order to reduce the number of holes that must be drilled in the hull. |
110 x 110mm |
| WSD834 |
Wind directionspeed indicator including masthead sensor with no moving parts. Gives a digital read-out of wind speed and direction plus both digital and analogue indication of wind direction. |
110 x 110mm |
| MMW004 |
Spare masthead indicator for wind direction/speed indicator. NMEA0183 compatible. |
110 x 73 x 57mm |
| GD1000 |
Gas detector, which may be installed with one or two sensors. It constitutes a gas detection system for a range of combustible gases, such as propane, butane, methane and hydrogen. It will also sense carbon monoxide. Petrol fumes trigger the unit at very low concentrations. Can be provided with a relay to operate engine room ventilators and/or gas shut-off valve. Includes three switched connectors which can be used to actuate additional warnings, eg horn or light. 12v or 24v: includes one sensor. |
85mm x 85mm |
| RPI1700 |
Rudder position indicator, for 12v or 24v operation. Requires sender type RFU1718. |
94mm x 94mm |